The tutorial and Q&A of XPROTO-ATX V2

March 2022

Because XPROTO-V2 has adjusted a lot of details compared to the existing installation video tutorial

Listed below are the differences between XPROTO-ATX and the installation video

下文是与安装视频不同之处

1：Pcie Riser Cable Bracket Fixed Mode Adjustment PCIE线固定系统调整

(The height of the graphics card is lowered and moved outward to strengthen the strength of the screw hole）

Adjusted mounting nodes can secure more graphics card sizes more firmly

The B2 copper pillar is canceled, and all the copper pillars on the chassis are B1

显卡延长线支架固定方式有调整。现在能够固定更多尺寸的显卡并且更为牢固

B2铜柱取消，机箱上所有铜柱都是用B1

In the image above, the graphics card fixing part is installed inside the case. In some special cases, you may need to install the extension cable holder on the outside of the chassis , Or install the graphics card IO baffle side on the lower part of the chassis baffle like the image below

上图中，显卡固定件安装在机箱内部。在某些特殊情况下，可能需要在机箱外侧安装延长线座，或者像下图这样在机箱挡板下部安装显卡IO挡板侧

2：HDD fixation system adjustment 硬盘固定系统调整

Now you don't need to remove the motherboard to fix the 3.5HDD bracket （Refer to the installation form of the 2.5-inch hard disk bracket in the video）

3.5 hard drive bracket can install 2.5 inch hard drive at the same time

You can also fix two 2.5-inch hard drives in the middle frame

现在您无需拆卸主板即可固定 3.5HDD 支架（参考视频中2.5英寸硬盘支架的安装形式）

3.5寸硬盘支架可同时安装2.5寸硬盘

中框中可以安装2.5英寸硬盘